您的位置：
REXROTH機械式調壓閥應用，安沃馳調壓閥參數
簡要描述：REXROTH機械式調壓閥應用，安沃馳調壓閥參數壓力露點必須少低于環境和介質溫度15 °C，并且允許 的Z高溫度為 3 °C。適用于在 1、2、21、22 Ex 區內使用建議的初過濾: 5 µmInstallation location is arbitraryWorking pressure range 0,5 bar / 16 barMedia compressed
產品型號： 0821302558
所屬分類：力士樂（博士）閥
更新時間：2024-08-23
廠商性質：經銷商
瀏覽次數：963
REXROTH機械式調壓閥應用，安沃馳調壓閥參數
外殼 壓鑄鋅
正面板 丙烯腈合成材料
密封 丙烯樹膠
介質溫度范圍 -10°C / +60°C
Ambient temperature range -10 ° C / + 60 ° C
Regulator Type Diaphragm type regulator can be assembled into blocks
Adjust the function with secondary exhaust
安裝位置 任意
工作壓力范圍 0,5 bar / 16 bar
介質 壓縮空氣
中性氣體
the ambient and medium temperature and the maximum permissible temperature is 3 ° C.
Close the pressure gauge connector on the rear of the
regulator with a sealing plug and open the front.
REXROTH機械式調壓閥應用，安沃馳調壓閥參數
Can be equipped with separate sealing plug according to
customer application. Please order separay (see attachment).
Applicable to use in the 1,2,21,22 Ex area
Recommended primary filter: 5 μm
環境溫度范圍 -10°C / +60°C
調節器型號 隔膜式調壓閥, 可以組裝成塊
調整功能 帶二次排氣
調節范圍 zui小/zui大 見下表
壓力輸送 單的
二次壓力為 p2 = 6 bar 、Δp = 1 bar 時的額定流量 Qn
Adjustment range min / max See table below
Pressure delivery single
Shell die-cast zinc
Positive Panel Acrylonitrile Synthetic Material
Sealed acrylic gum
The pressure dew point must be at least 15 ° C below
銷售部
阿里旺旺